The significance of maintaining your home can hardly be overestimated. Otherwise, failure to properly care for your apartments might cause serious troubles, such as short circuits, flooding, overpriced annual maintenance cost, and serious self-injuring.
Fortunately, you can prevent most significant issues by providing proper care to your house. Below, we outline the most common property maintenance issues and offer advice on reducing your house maintenance cost.
1. Know Your Contractors
Most simple actions can be performed on your own to save money, while complex jobs require relevant specialists as you might cause harm unknowingly. As a result, you pay way more to double-fix everything. So don’t delay finding your contractor whom you can trust and have on speed dial.
For example, Thumbtack reviews on PissedConsumer.com prove that hiring some contractors might be like getting a cat in a bag. That’s why it is essential to do proper research and find true professionals with the help of review websites. This will pay off.
2. Do the Check-up Every 6 Months
Regularity is vital. Especially if your home is over 10 years, you have recently moved into a new apartment, or you have just performed restoration work to avoid any unfavorable outcomes. Also, have contacts of customer service of all your equipment, furniture, and electronics at hand to address any questions asap.
Each year, home electrical fires are responsible for approximately 51 000 fires, nearly 500 deaths, almost 1 500 injuries, and $1.3 billion in house damage. That’s why ensure you’ve taken all necessary precautions to avoid serious financial and property damages.
3. Create a House Maintenance Budget
First, you should know the components of the house system to be able to take into account all possible maintenance expenses and save money beforehand. It consists of MEPFS (mechanical, electrical, plumbing, and fire safety) and HVAC (heating, ventilation, and air conditioning) inspection.
Find out the average cost of home maintenance on your building, plan the work that should be done, and include the potential force-majeure circumstances costs so you’ll have enough money for any situation. Never take even a small sum from it for other purposes.
4. Plan Annual AC Maintenance
This will help to save dozens of dollars on complex repairs that could occur if a yearly service is skipped. Seal your home correctly to prevent air from leaking outside and keep humidity in your home for a comfortable living environment and reduce your energy bills and house maintenance cost.
5. Examine Your Apartment’s Electrical Items
Pay attention to panels, switchboards, elevators, transformers, cable trays, and other similar items. Check electrical wires, network cables, power plugs, and outlets to prevent any sort of disruption. We recommend doing this with an electrical specialist to avoid injuries. Search for good specialists based on consumer reviews to meet your requirements.
6. Take Good Care of the Plumbing System
According to water damage statistics, even a minor leak can raise the average water bill by 10%. If you just moved in, install pipes and fittings, drainage, and fixtures of high quality. Go over pumps, water storage tanks, pool filtration equipment, sump, sewage pit, grease and sand traps, etc. for signs of any damage or leakage and fix it right away.
If you have any kind of plumbing problem and you are uncertain how to repair it, contact an expert California leak detection service as it may cost flooding or self-injury.
7. Never Neglect Fire Safety
Make sure you have correctly working Carbon Monoxide and Smoke Detectors in every room, so your home and households are protected from fire hazards, and the fire authorities will be notified if any issue happens.
Check the pumps for fire sprinklers, sprinkler tanks, fire shutters, smoke curtains, piping systems, etc. Thus, you’ll definitely save a lot due to fire prevention.
8. Go Through the Heating System
Heating makes use of elements such as a furnace, boiler, and heat pump. You must carefully examine the heat exchanger and venting system for holes, rust, or blockage. Replace your heater filter if necessary because in case it is blocked up, it will no longer filter the oxygen supply and will significantly reduce your furnace’s performance.
9. Install Purification Systems
To ensure a constant supply of fresh air, a purification system exchanges indoor air for outdoor air. In case you feel a lack of oxygen, better look up for the ventilation system. If it’s working properly, the airflow keeps clean and consistent.
Otherwise, place powerful filters and check them regularly. Explore your options in any shop you’d like and check it for liability on online reviews websites so you won’t get faulty equipment.
10. Check the Ventilation System
Inspect your vents for blockages such as leaves or any other waste, and clean them up if so. If you see leaking or need to open the AC unit, check it only with experts. Also, ensure they are working without any distractions and strange noises which may be indicators of issues with ventilation that may need repair.
Wrapping Up
We recommend inspecting your inside-house appliances every quarter. This is also an excellent time to check your gutters, water tank, smoke detectors, and other similar items. So you will be ensured that everything is in decent condition and decrease home maintenance costs. These elements may be able to save your life, prolong the house equipment functioning and even increase the house rate on the market. Remember that every detail counts!
Image Source: BigStockPhoto.com (Licensed)
Related Categories: Home, Reviews
